Marketplace
Aim Robotics FD High-V Fluid Dispenser
The High-V is designed to work with an external large-volume grase pump system that supplies it with continuous flow at constant pressure. This combination allows for a reliable and effective high-volume fluid dispensing solution for collaborative applications.
2 kg
ROI Calculator
€6,710.00 excl. VAT.
From 700,00 € a month with lease buy or installment.
- Overview
- Specifications
- Description
- Downloads
- FAQ
- Similar products
Easy Installation and Setup
Up and running in 10 minutes with just a single connection point to robot.
Intuitive Interface
The FD400 comes with Aim Robotics' inuitive and easy-to-use custom software solution. The interface is user-friendly and designed to help you set up and adjust your Air Robotics FD400 with ease.
Fully integrated with Universal Robots
The FD400 is fully integrated with cobots from Universal Robots. The device connects to a UR3e, UR5e, UR10e, or UR16e via a single M8 8-pin connector. The FD400 is UR Certified.
Various viscosities
The FD400 can dispense fluids ranging from medium to high viscosity.
Accuracy where you need it
The FD400 allows for accurate placement on any shape, surface, or orientation in continuous motion.
Consistent Quality
AirLess Technology™ by Aim Robotics ensures minimal flow variation
Problem detection
Automatic error detection and operator alert
Applications
Lubrication/Greasing, Flux Application, Sealant Bead Application, Edge Sealing, Adhesive Application, Potting
Featured on Unchained TV
Unfortunately, there are no use case videos yet for this product. Click here to watch other videos on Unchained TV.
| Overview | ||
|---|---|---|
| Weight | 2 kg | |
| Dimension | 403 x 133 x 156 mm | |
| Performance | ||
|---|---|---|
| Min. Operating Temperature | -10 °C | |
| Max. Operating temperature | 54 °C | |
| Dispensing Variance | 5 % | |
| Min. Viscosity | 150,000 | |
| Max. Viscosity | 3,000,000 | |
| Interfaces | ||
|---|---|---|
| Supply voltage | 24 V | |
| Max. current | 1.2 A | |
| Nominal current | 0.6 A | |
| Communication | RS 485, 2DI | |
| Mounting Interface | ISO 9409-1, type 50-4-M6 | |
| Properties | ||
|---|---|---|
| IP classification | IP65 | |
The Aim Robotics High-V Fluid Dispenser is a Plug&Dispense solution. It is a modern, airless fluid dispensing tool designed to be mounted on a collaborative robot. In the past, fluid dispensing was often a messy, imprecise and complicated task. Those times are over with the Aim Robotics High-V! With the High-V, clean, predictable, and accurate fluid dispensing is not only achievable, but even easy.
The Aim Robotics High-V Fluid Dispenser works with any cobot from Universal Robots and can be easily set up and programmed through its URCap. Dispensing is controlled, accurate, and reliable thanks to Aim Robotics' single screw pump dispensing design.
The tool is airless - it does away with compressed air in favor of electricity. This means that a single M8 connection is all that is necessary to control and power the gripper, simplifying maintenance and reducing points of failure. The Aim Robotics High-V is designed to work in conjunction with a large colume grease pump system that supplies the dispensor with a continuous flow at constant pressure.
How it works
The High-V uses a single screw pump dispensing system; fluid is pumped through the system with an electrical motor removing the use of compressed air. The Aim Robotics URCap guides the user in setup and is easily reprogrammed. Further, the High-V's cleaning cycles help to prevent fluid build up in the nozzle. You can control the dispnesing speed of the High-V from within the URCap.
Exchangeable Auger Screws
3 different auger screw sizes make FD Series dispensers the perfect fit for most dispensing applications:
- 5mm pitch – used when either additional inherent flow resistance is required and/or a finer deposit rate control is required. Lowest flow rate.
- 7.5mm pitch – appropriate for most applications. Inherent resistance and material flow are moderate.
- 10mm pitch – used when high flow rates and low resistance to flow are required.
Download the Aim Robotics FD High-V Datasheet (EN) here!
Download the Aim Robotics FD High-V User Manual (EN) here!
Lade dir hier die Aim Robotics FD High-V STEP Datei herunter!
To place an order, send us an inquiry through the button at the top of the page or contact us through the chat.
Unchained Robotics is the biggest marketplace for all things automation. We have over 36 brands with 9 different categories such as Cobots, Grippers, Cameras, Starter-kits, End-of-Arm-Accessories, Teaching-kits, Turnkey Solution, Cobot-Base and even
Services. For more information, check out our About page.
We have the answer for you in a series of blog post below:
Was du bei der Auswahl eines Cobots beachten solltest – The Specs that Matter
The Specs that Matter Die Top 10 Fragen zur Roboterwahl
Talk to an
Automation expert
Have questions about this product, pricing, or your automation projects? Fill out the form and an automation expert from our team will be in touch within 24 hours.
